Documente tehnice
Specificatii
Marca
ITT CannonSubtip
Female
Dimensiune fir
18 → 16 AWG
Terminal
Crimp
Serie
T2P
Contact Type
Signal
Curent nominal
16A
Lungime
18.42mm
Placa contact
Tin
Material de contact
Copper Alloy
Maximum Contact Resistance
5mΩ
Frecventa minima de auto-rezonanta
-55°C
Temperatura maxima de lucru
+125°C
Montare
Cable Mount
Tara de origine
Germany
Detalii produs
Signal Contacts
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
€ 6,30
€ 0,63 Buc. (Intr-un pachet de 10) (fara TVA)
€ 7,50
€ 0,75 Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 6,30
€ 0,63 Buc. (Intr-un pachet de 10) (fara TVA)
€ 7,50
€ 0,75 Buc. (Intr-un pachet de 10) (cu TVA)
10
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
Cantitate | Pret unitar | Per Pachet |
---|---|---|
10 - 10 | € 0,63 | € 6,30 |
20 - 50 | € 0,61 | € 6,10 |
60+ | € 0,58 | € 5,80 |
Documente tehnice
Specificatii
Marca
ITT CannonSubtip
Female
Dimensiune fir
18 → 16 AWG
Terminal
Crimp
Serie
T2P
Contact Type
Signal
Curent nominal
16A
Lungime
18.42mm
Placa contact
Tin
Material de contact
Copper Alloy
Maximum Contact Resistance
5mΩ
Frecventa minima de auto-rezonanta
-55°C
Temperatura maxima de lucru
+125°C
Montare
Cable Mount
Tara de origine
Germany
Detalii produs
Signal Contacts
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.