Soldering Iron Tips

Soldering iron tips transfer heat from a soldering iron into solder so that it melts and can flow into the joint between two components or workpieces. They’re also sometimes referred to as ‘bits’.

To protect your soldering iron tips, you should tin your tip before and after soldering to create a protective layer between the air and the soldering iron tip. Tinning prevents oxidisation and allows for a more efficient heat transfer.

Optimal operating temperature

Putting your soldering tips through excessive temperatures will shorten their lifespan. The temperature of the tip will decrease as the soldering iron is used more. There is the temptation to increase the idle temperature to compensate for this temperature drop – but don’t as this will shorten the life of the soldering iron tip. If you aren’t actively using your soldering iron think about turning it off or setting it to a low ‘idle’ temperature to maximise tip life.

How do you clean a soldering iron?

To keep your tip in perfect condition you should aim to clean before, during and after use. Before you solder, ensure that you have cleaned the surfaces which are to be soldered with an alcohol wipe.

To clean your tips, use either brass wool (less abrasive) or stainless steel wool (more abrasive). Try to avoid using a sponge as doing so rapidly cycles the tip through a hot and cold cycle. Doing this repeatedly will cause metal fatigue and tip failure. Once you have cleaned the tip ensure that you cover the tip with fresh solder so as to present oxidisation.

Using flux

When metals come into contact with oxygen an oxide layer is formed on the surface of the metal. This oxidisation prevents solder from wetting the joint correctly and impacts the quality of the solder joint. Flux dissolves this oxidisation layer.

Reactivating your soldering iron tips

If a soldering iron tip becomes oxidised it will appear darker in colour and you may not be able to tin it. If your tip is oxidised you can use a tip activator to remove the oxidisation as it will break down the oxide layer. Once cleaned and refreshed tin the tip again to protect it from oxidisation.

Soldering iron tip shapes

Most soldering irons have interchangeable tips that have slightly different shapes to allow for different tasks or precision levels. For example, conical tips are used for fine electronics work. Other common tip shapes include:

  • bevel (aka hoof)
  • chisel
  • concave
  • pyramid
  • bent
868
Rezultate
You've made new selections.
Click "aplica filtre" sa vedeti produsele noi.
Filtre aplicate
Vedeti 1 - 20 din 868 rezultate
Alegeti tipul de afisare al produselor:
Rezultate pe pagina
20
  • 20
  • 50
  • 100
Pret
(Pret fara TVA)
Detalii produs Marca Stock Model Number Tip Shape For Use With Tip Size Tip Series Tip Angle
Weller XH A 27 x 1.6 x 0.8 mm Chisel Soldering Iron Tip for use with WTP 90 / WXP 90 Soldering Pencil Weller 0 XH A Chisel WTP 90 / WXP 90 Soldering Pencil 27 x 1.6 x 0.8 mm HM -
Weller XH B 27 x 2.4 x 0.8 mm Chisel Soldering Iron Tip for use with WTP 90 / WXP 90 Soldering Pencil Weller 0 XH B Chisel WTP 90 / WXP 90 Soldering Pencil 27 x 2.4 x 0.8 mm HM -
Weller XH C 27 x 3.2 x 0.8 mm Chisel Soldering Iron Tip for use with WTP 90 / WXP 90 Soldering Pencil Weller 0 XH C Chisel WTP 90 / WXP 90 Soldering Pencil 27 x 3.2 x 0.8 mm HM -
Weller XH D 27 x 4 x 0.8 mm Chisel Soldering Iron Tip for use with WTP 90 / WXP 90 Soldering Pencil Weller 0 XH D Chisel WTP 90 / WXP 90 Soldering Pencil 27 x 4 x 0.8 mm HM -
Weller XH HX 35 x 0.8 x 0.4 mm Chisel Soldering Iron Tip for use with WTP 90 / WXP 90 Soldering Pencil Weller 0 XH HX Chisel WTP 90 / WXP 90 Soldering Pencil 35 x 0.8 x 0.4 mm HM -
Weller XH HXHS 35 x 0.8 x 0.4 mm Chisel Soldering Iron Tip for use with WTP 90 / WXP 90 Soldering Pencil Weller 0 XH HXHS Chisel WTP 90 / WXP 90 Soldering Pencil 35 x 0.8 x 0.4 mm HS -
Metcal 0.13 Dia. x 5.1 mm Conical Soldering Iron Tip Metcal 0 UFC Conical CV-H2-UF 0.13 Dia. x 5.1 mm - -
Metcal 0.2 Dia. x 5.1 mm Conical Soldering Iron Tip Metcal 0 UFC Conical CV-H2-UF 0.2 Dia. x 5.1 mm - -
Metcal 0.2 Dia. x 5.6 mm Conical Soldering Iron Tip Metcal 0 UFC Conical CV-H2-UF 0.2 Dia. x 5.6 mm - 30°
Metcal 0.2 Dia. x 5.6 mm Conical Soldering Iron Tip Metcal 0 UFT Conical CV-H4-UFT 0.2 Dia. x 5.6 mm - -
Metcal 0.25 Dia. x 13.2 mm Conical Soldering Iron Tip Metcal 0 CVC Conical CV-500 Systems, CV-5200, CV-H7-AV Solder Hand Pieces, MX-500, MX-5000, MX-5200, MX-H1-AV, MX-H7-SF - CV-H1-AV, MX-RM3E, MX-RM6E 0.25 Dia. x 13.2 mm 800 -
Metcal 0.31 Dia. x 5 mm Soldering Iron Tip Metcal 0 UFT Power Wedge CV-H4-UFT 0.31 Dia. x 5 mm - -
Metcal 0.4 Dia. x 13.7 mm Conical Soldering Iron Tip Metcal 0 CVC Conical CV-500 Systems, CV-5200, CV-H7-AV Solder Hand Pieces, MX-500, MX-5000, MX-5200, MX-H1-AV, MX-H7-SF - CV-H1-AV, MX-RM3E, MX-RM6E 0.4 Dia. x 13.7 mm 600 -
Metcal 0.4 Dia. x 13.7 mm Conical Soldering Iron Tip Metcal 0 CVC Conical CV-500 Systems, CV-5200, CV-H7-AV Solder Hand Pieces, MX-500, MX-5000, MX-5200, MX-H1-AV, MX-H7-SF - CV-H1-AV, MX-RM3E, MX-RM6E 0.4 Dia. x 13.7 mm 700 -
Metcal 0.4 Dia. x 13.7 mm Conical Soldering Iron Tip Metcal 0 CVC Conical CV-500 Systems, CV-5200, CV-H7-AV Solder Hand Pieces, MX-500, MX-5000, MX-5200, MX-H1-AV, MX-H7-SF - CV-H1-AV, MX-RM3E, MX-RM6E 0.4 Dia. x 13.7 mm 800 -
Metcal 0.4 Dia. x 14.3 mm Bent Soldering Iron Tip Metcal 0 PTC Bent CV-500 Systems, CV-5200, CV-H4-PTZ Tweezer Hand Pieces, MX-500, MX-5000, MX-5200, MX-PTZ 0.4 Dia. x 14.3 mm - 30°
Metcal 0.4 Dia. x 14.7 mm Conical Soldering Iron Tip Metcal 0 CVC Conical CV-500 Systems, CV-5200, CV-H7-AV Solder Hand Pieces, MX-500, MX-5000, MX-5200, MX-H1-AV, MX-H7-SF - CV-H1-AV, MX-RM3E, MX-RM6E 0.4 Dia. x 14.7 mm 600 -
Metcal 0.4 Dia. x 14.7 mm Conical Soldering Iron Tip Metcal 0 CVC Conical CV-500 Systems, CV-5200, CV-H7-AV Solder Hand Pieces, MX-500, MX-5000, MX-5200, MX-H1-AV, MX-H7-SF - CV-H1-AV, MX-RM3E, MX-RM6E 0.4 Dia. x 14.7 mm 700 -
Metcal 0.4 Dia. x 14.7 mm Conical Soldering Iron Tip Metcal 0 CVC Conical CV-500 Systems, CV-5200, CV-H7-AV Solder Hand Pieces, MX-500, MX-5000, MX-5200, MX-H1-AV, MX-H7-SF - CV-H1-AV, MX-RM3E, MX-RM6E 0.4 Dia. x 14.7 mm 800 -
Metcal 0.4 Dia. x 16 mm Conical Soldering Iron Tip Metcal 0 CVC Conical CV-500 Systems, CV-5200, CV-H7-AV Solder Hand Pieces, MX-500, MX-5000, MX-5200, MX-H1-AV, MX-H7-SF - CV-H1-AV, MX-RM3E, MX-RM6E 0.4 Dia. x 16 mm 600 30°
Verificati disponibilitatea stocului
Introduceti cantitatea pe care o doriti si apoi apasati "Verifica".
Informatia este actualizata zilnic, astfel incat disponibilitatea poate varia in momentul plasarii comenzii.
Nr. stoc RS::
Cantitatea 
Comparati produsele selectate
Puteti compara doar 8 produse in acelasi timp

Comparati produsele selectate
Vedeti 1 - 20 din 868 rezultate