Parallels, Surface Finish & Hardness Testers

Parallel testing allows you to test multiple applications or subcomponents of one application to reduce the time. These tests consist of two or more parts that check different components or practical characteristics of an application.
Any machined component has a surface geometry which consists of three basic elements:
● Form or Curvature – whether the surface has irregular bumps or dimensional changes
● Waviness –that depends of the surface that has regular repetitive ripples or patterns
● Roughness – shapes or the irregularities that are smaller than and form part of the waviness pattern
Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.

We offer:
● Parallel Testers
● Hardness Tester – works by accelerating the internal bounce module against the tested item. Depending on object hardness the kinetic energy of the module is absorbed. Speed reduction is measured and converted to hardness values
● Surface Finish Tester – it is invaluable for tactile and visual inspection of machined component finish
16
Rezultate
You've made new selections.
Click "aplica filtre" sa vedeti produsele noi.
Filtre aplicate
Vedeti 1 - 16 din 16 rezultate
Alegeti tipul de afisare al produselor:
Rezultate pe pagina
20
  • 20
  • 50
  • 100
Pret
(Pret fara TVA)
Detalii produs Marca Stock Tester Type Recent introdus Number of Matched Pairs
DIGITAL SHORE A DUROMETER RS Pro 30 Durometer - -
Mechanical Hardness Meter Shore A Sauter 27 Durometer - -
Shore A hardness test durometer,1-100 RS Pro 15 Durometer - -
10 pair parallel matched set RS Pro 11 Parallels - 10
Mechanical Hardness Meter Shore D Sauter 9 Durometer - -
ADJUSTABLE PARALLEL SET 9.5 - 57.2MM RS Pro 5 Parallels - 6
4 pair parallel matched set RS Pro 4 Parallels - 4
Mechanical Shore Hardness Tester Sauter 4 - -
Dial durometer HARDMATIC shore A Mitutoyo 0 Durometer - -
Digital Coating Thickness Gauge Sauter 0 FN - -
Digital Coating Thickness Gauge Sauter 0 FN - -
Digital durometer HARDMATIC shore D Mitutoyo 0 Durometer - -
Leeb Impact Hardness Tester Sauter 0 Leeb - -
Pen Type Leeb Hardness Tester Sauter 0 Leeb - -
Specimen Comparator, Surface Finish RS Pro 0 Surface Comparator - -
UCI Hardness Tester Sauter 0 - -
Verificati disponibilitatea stocului
Introduceti cantitatea pe care o doriti si apoi apasati "Verifica".
Informatia este actualizata zilnic, astfel incat disponibilitatea poate varia in momentul plasarii comenzii.
Nr. stoc RS::
Cantitatea 
Comparati produsele selectate
Puteti compara doar 8 produse in acelasi timp

Comparati produsele selectate
Vedeti 1 - 16 din 16 rezultate