Flue Gas Analysers

A flue gas analyser (FGA) is a portable, digital tool used by heating engineers to measure CO, oxygen (O2), differential pressure and temperature of a fossil fuelled appliance such as a fire, hot water heater and domestic boiler. The gas analysers can also be used to measure a room’s air as long as it has been calibrated in fresh air outside the room to be tested.


Why do I need to use a FGA?


Your gas appliances mix air and fuel to create products of combustion. Using a flue gas analyser when installing, repairing or servicing all heating appliances it can alert you to any safely and efficiency issues. It can detect gases such as carbon monoxide which is an odourless, colourless and tasteless poisonous gas which can kill.


Benefits of flue gas analysers


  • Draw gases straight from a flue

  • Provides data on the screen that can stop healthy appliances from expensive and unnecessary stripping

  • Record compliance with new regulations, such as the newly issued BS7967, which covers safety aspects of carbon monoxide as well as requirements for CO: CO2 ratio parameters; and the European Design Standard EN50379, which covers portable electrical devices used to measure combustion flue gas parameters.

  • Accurate and stable pressure readings

  • Readings are taken using a single probe and the effect of any burner adjustment is shown in real time, making it easy to make any adjustments and then you can confirm the actions and document that the appliance is safe.

Note

Readings from a FGA will vary depending on the type of appliance. It is advised to always consult manufacturer’s instructions.

Vedeti 1 - 3 din 3 rezultate
Alegeti tipul de afisare al produselor:
Rezultate pe pagina
20
  • 20
  • 50
  • 100
Pret
(Pret fara TVA)
Detalii produs Best Carbon Monoxide Accuracy Stock Carbon Monoxide Resolution Best Oxygen Level Accuracy Best Temperature Measurement Accuracy Temperature Measurement Resolution Weight Model Number p Maximum Carbon Monoxide Level Battery Type Battery Life Maximum Carbon Dioxide Level Maximum Operating Temperature
Flue Gas Analyser Kit supplied with Anal ±5% 5 1 ±0.3% ±0.3 (External) %, ±0.3 (Flue) %, ±0.3 (Internal) % ±0.1 (External) °C, ±0.1 (Flue) °C, ±0.1 (Internal) °C 800g KANE458 20 ppm, >2000 (Purge Pump Operate) ppm, 2000 (Nom) ppm 4AA >8 h 20% +45°C
Flue Gas Analyser supplied with probe, c ±5% 4 1ppm ±0.3% ±0.3 (External) %, ±0.3 (Flue) %, ±0.3 (Internal) % ±0.1 (External) °C, ±0.1 (Flue) °C, ±0.1 (Internal) °C 1kg KANE255 60 ppm, 2000 (Nom) ppm, 4000 (For 15 min) ppm 4AA >8 h 20% +40°C
KANE450-201 KIT/RS Flue Gas Analyser
  • Nr. Stoc RS 146-777
  • Marca Kane
  • Cod Producator KANE450 KIT/RS
±10ppm 8 1ppm ±0.2% ±1 °C 1°C 770g KANE450 KIT 4000ppm AA x 4 12 h 30% +40°C
Verificati disponibilitatea stocului
Introduceti cantitatea pe care o doriti si apoi apasati "Verifica".
Informatia este actualizata zilnic, astfel incat disponibilitatea poate varia in momentul plasarii comenzii.
Nr. stoc RS::
Cantitatea 
Comparati produsele selectate
Puteti compara doar 8 produse in acelasi timp

Comparati produsele selectate
Vedeti 1 - 3 din 3 rezultate