Arbors

An arbor or mandrill is an attachment that is used with a hole saw and power drills to cut holes in metal, plastic and wood. The arbor is made up of three sections:

  • Arbor shaft – This end of the attachment is the section that fits into the chuck of the power drill.
  • Central collar – The central collar is the middle part of the arbor with a short threaded section on the underside of the collar base.
  • Pilot bit - The pilot bit is a drill bit fixed into the central collar through the threaded portion on the underside of the collar head.

What does it do?
An arbor is a way of temporarily securing a hole saw to a power drill to enable cutting of circular holes in metal, plastic or wood. The arbor shaft is fixed into the chuck of the power drill. The hole saw is attached to the arbor through a small hole at the centre back of the hole saw. The saw is secured to the arbor by screwing the thread at the back of the hole saw to the threaded section under the central collar.

Why do you need it?
Hole saws and arbors are used in a wide variety of applications. The most common environments are:

  • Lighting - Cutting the hole in a ceiling before installing light fixtures
  • Drainage - Cutting holes in walls before installing waste pipes.
  • Pipework and plumbing - Cutting access holes for plumbing and pipelines.
  • Electrical cables and wiring - Cutting access holes in preparation for electric wiring connections.

Types
There are two sizes of arbor:

  • Small arbor - 6.5mm – The 6.5mm arbor is used with hole saws with diameters in the 14mm to 32 mm range
  • Large arbor - 9.5mm – The 9.5mm arbor is used with hole saws with diameters in the 32mm to 152mm range
9
Rezultate
You've made new selections.
Click "aplica filtre" sa vedeti produsele noi.
Filtre aplicate
Vedeti 1 - 9 din 9 rezultate
Alegeti tipul de afisare al produselor:
Rezultate pe pagina
20
  • 20
  • 50
  • 100
Pret
(Pret fara TVA)
Detalii produs Marca Supported Holesaw Size Diameter
Starrett 6.5mm arbor,14-30mm capacity Starrett 14 → 30mm 1/4in
Starrett Arbor (A10) 32 → 152mm bimetal Starrett 32 → 152mm 1/4in
RS PRO Arbor 32 → 152mm bimetal RS Pro 32 → 152mm 9.5mm
RS PRO Arbor 14 → 30mm bimetal RS Pro 14 → 30mm 6.5mm
ACCESSORIES 12" EXTENSION-1/2 CHUCK 1PK Lenox 1L mm, 2L mm, 3L mm 12.7mm
ACCESSORIES INT 6L ARBOR SNAP BACK 1CM Lenox 32 <arrow/> 152 mmmm 9.5mm
ACCESSORIES INT 2L ARBOR SNAP BACK 1 CM Lenox 20 → 96L 12.7mm
ACCESSORIES INT 5L ARBOR SNAP BACK 1CM Lenox 14 <arrow/> 30 mmmm 9.5mm
Fixing bracket for desk sockets Legrand - -
Verificati disponibilitatea stocului
Introduceti cantitatea pe care o doriti si apoi apasati "Verifica".
Informatia este actualizata zilnic, astfel incat disponibilitatea poate varia in momentul plasarii comenzii.
Nr. stoc RS::
Cantitatea 
Comparati produsele selectate
Puteti compara doar 8 produse in acelasi timp

Comparati produsele selectate
Vedeti 1 - 9 din 9 rezultate