Texas Instruments TUSB4020BIPHP, USB Hub, 2-Channel, 480Mbps, USB 2.0, 48-Pin HTQFP
Documente tehnice
Specificatii
Marca
Texas InstrumentsNumber of Transceivers
2
Data Rate
480Mbps
IC Type
Controller IC
Protocols Supported
USB 2.0
Tip alimentare
Dual
ESD protection
Yes
Typical Dual Supply Voltage
1.1 V, 3.3V
Timp montare
Surface Mount
Tip pachet
HTQFP
Numar pini
48
Dimensiuni
7.2 x 7.2 x 1.05mm
Inaltime
1.05mm
Lungime
7.2mm
Temperatura maxima de lucru
+85 °C
Latime
7.2mm
Temperatura minima de lucru
-40 °C
Tara de origine
Philippines
Detalii produs
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.
USB (Universal Serial Bus), Texas Instruments
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 5,14
Buc. (Pe o rola de 250) (fara TVA)
€ 6,117
Buc. (Pe o rola de 250) (cu TVA)
250
€ 5,14
Buc. (Pe o rola de 250) (fara TVA)
€ 6,117
Buc. (Pe o rola de 250) (cu TVA)
250
Documente tehnice
Specificatii
Marca
Texas InstrumentsNumber of Transceivers
2
Data Rate
480Mbps
IC Type
Controller IC
Protocols Supported
USB 2.0
Tip alimentare
Dual
ESD protection
Yes
Typical Dual Supply Voltage
1.1 V, 3.3V
Timp montare
Surface Mount
Tip pachet
HTQFP
Numar pini
48
Dimensiuni
7.2 x 7.2 x 1.05mm
Inaltime
1.05mm
Lungime
7.2mm
Temperatura maxima de lucru
+85 °C
Latime
7.2mm
Temperatura minima de lucru
-40 °C
Tara de origine
Philippines
Detalii produs
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.