STMicroelectronics Battery Charger, Energy Harvesting for SPV1050

Nr. stoc RS: 875-0898Producator: STMicroelectronicsCod de producator: STEVAL-ISV019V1
brand-logo

Documente tehnice

Specificatii

Power Management Function

Battery Charger, Energy Harvesting

Clasificare

Evaluation Board

Featured Device

SPV1050

Detalii produs

SPV1050 ULP Energy Harvester and Battery Charger Evaluation Board, STMicroelectronics

The STEVAL-ISV019V1 is an Evaluation Board based on the SPV1050, an Ultra Low Power (ULP) energy harvester and battery charger with embedded MPPT and LDO (Low Dropout) Regulators.
The evaluation board is working at the best efficiency implementing the MPPT (Maximum Power Point Tracking) DC-DC converter configuration.
It is optimized to harvest energy from Photovoltaic (PV) panels supplying 0.5V to 2.5V and 30μA to 20mA. You can charge a battery with 3.7V under-voltage protection threshold and 4.2V end of charge voltage threshold. Operating flexibility is possible for a different PV panel and battery with a few easy board changes on the application components.

Battery Charging & Monitoring, STMicroelectronics

Informatii indisponibile despre stoc

Incercati din nou mai tarziu

Informatii indisponibile despre stoc

€ 44,24

€ 44,24 Buc. (fara TVA)

€ 52,65

€ 52,65 Buc. (cu TVA)

STMicroelectronics Battery Charger, Energy Harvesting for SPV1050

€ 44,24

€ 44,24 Buc. (fara TVA)

€ 52,65

€ 52,65 Buc. (cu TVA)

STMicroelectronics Battery Charger, Energy Harvesting for SPV1050
Informatii indisponibile despre stoc

Documente tehnice

Specificatii

Power Management Function

Battery Charger, Energy Harvesting

Clasificare

Evaluation Board

Featured Device

SPV1050

Detalii produs

SPV1050 ULP Energy Harvester and Battery Charger Evaluation Board, STMicroelectronics

The STEVAL-ISV019V1 is an Evaluation Board based on the SPV1050, an Ultra Low Power (ULP) energy harvester and battery charger with embedded MPPT and LDO (Low Dropout) Regulators.
The evaluation board is working at the best efficiency implementing the MPPT (Maximum Power Point Tracking) DC-DC converter configuration.
It is optimized to harvest energy from Photovoltaic (PV) panels supplying 0.5V to 2.5V and 30μA to 20mA. You can charge a battery with 3.7V under-voltage protection threshold and 4.2V end of charge voltage threshold. Operating flexibility is possible for a different PV panel and battery with a few easy board changes on the application components.

Battery Charging & Monitoring, STMicroelectronics