Documente tehnice
Specificatii
Transistor Type
NPN
Number of Elements per Chip
1
Numar pini
3
Transistor Configuration
Single
Minimum DC Current Gain
25
Timp montare
Through Hole
Maximum Operating Frequency
3 MHz
Maximum Emitter Base Voltage
5 V
Temperatura maxima de lucru
+150 °C
Maximum DC Collector Current
2 A
Maximum Collector Base Voltage
80 V
Maximum Collector Emitter Voltage
80 V
Maximum Power Dissipation
25 W
Tip pachet
SOT-32
Marca
STMicroelectronicsDimensiuni
10.8 x 7.8 x 2.7mm
Detalii produs
Angle Holder for Flexible Light Guides
The angle holders, from MENTOR, are designed for use with 2-mm and 3-mm flexible light pipes. The holder enables the user to position their light pipe at a 90° angle, redirecting the light to the desired interface. This positioning allows the front panel to sit perpendicular to the PCB.
The curvature of the angle holder supports the light pipe without applying stress to the pipe itself. Simply place the light pipe into the holder for a quick and easy design solution.
LED Light Pipes, MENTOR - Accessories
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 0,84
Each (In a Tube of 50) (fara TVA)
€ 1,00
Each (In a Tube of 50) (cu TVA)
50
€ 0,84
Each (In a Tube of 50) (fara TVA)
€ 1,00
Each (In a Tube of 50) (cu TVA)
50
Cumpara in pachete mari
Cantitate | Pret unitar | Per Tub |
---|---|---|
50 - 50 | € 0,84 | € 42,00 |
100 - 200 | € 0,61 | € 30,50 |
250 - 450 | € 0,58 | € 29,00 |
500 - 950 | € 0,51 | € 25,50 |
1000+ | € 0,44 | € 22,00 |
Documente tehnice
Specificatii
Transistor Type
NPN
Number of Elements per Chip
1
Numar pini
3
Transistor Configuration
Single
Minimum DC Current Gain
25
Timp montare
Through Hole
Maximum Operating Frequency
3 MHz
Maximum Emitter Base Voltage
5 V
Temperatura maxima de lucru
+150 °C
Maximum DC Collector Current
2 A
Maximum Collector Base Voltage
80 V
Maximum Collector Emitter Voltage
80 V
Maximum Power Dissipation
25 W
Tip pachet
SOT-32
Marca
STMicroelectronicsDimensiuni
10.8 x 7.8 x 2.7mm
Detalii produs
Angle Holder for Flexible Light Guides
The angle holders, from MENTOR, are designed for use with 2-mm and 3-mm flexible light pipes. The holder enables the user to position their light pipe at a 90° angle, redirecting the light to the desired interface. This positioning allows the front panel to sit perpendicular to the PCB.
The curvature of the angle holder supports the light pipe without applying stress to the pipe itself. Simply place the light pipe into the holder for a quick and easy design solution.