Documente tehnice
Specificatii
Marca
SMCConnector A
Push In 6 mm
Tip de montaj pneumatic
Bulkhead Threaded-to-Tube Adaptor
Conexiune
Threaded-to-Tube
Producator
KQ2
Thread Material
Nickel Plated Brass
Tip material
Nickel Plated Brass
Temperatura minima de lucru
-5 °C, 0°C
Temperatura maxima de lucru
+40 °C, +60°C
Finisare
Nickel Plated
Presiune maxima de operare
1 MPa, 3 MPa
Montare
15mm
Connector B
Push In 6 mm
Tube Connection A - Type
Push In
Tara de origine
Japan
Detalii produs
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.
Bulkhead Adapators
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 7,03
Buc. (Intr-un pachet de 10) (fara TVA)
€ 8,366
Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 7,03
Buc. (Intr-un pachet de 10) (fara TVA)
€ 8,366
Buc. (Intr-un pachet de 10) (cu TVA)
10
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
10 - 40 | € 7,03 | € 70,30 |
50 - 90 | € 6,52 | € 65,20 |
100+ | € 6,20 | € 62,00 |
Documente tehnice
Specificatii
Marca
SMCConnector A
Push In 6 mm
Tip de montaj pneumatic
Bulkhead Threaded-to-Tube Adaptor
Conexiune
Threaded-to-Tube
Producator
KQ2
Thread Material
Nickel Plated Brass
Tip material
Nickel Plated Brass
Temperatura minima de lucru
-5 °C, 0°C
Temperatura maxima de lucru
+40 °C, +60°C
Finisare
Nickel Plated
Presiune maxima de operare
1 MPa, 3 MPa
Montare
15mm
Connector B
Push In 6 mm
Tube Connection A - Type
Push In
Tara de origine
Japan
Detalii produs
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.