SMC Cylinder Repair Kit CS1N200A-PS, For Use With 200 mm Bore Size Air Cylinder

Nr. stoc RS: 849-7314Producator: SMCCod de producator: CS1N200A-PS
brand-logo
Vezi toate produsele din Accesorii actuatoare si cilindri

Documente tehnice

Specificatii

Utilizare cu

200 mm Bore Size Air Cylinder

Producator

CS1N

Marca

SMC

Tara de origine

Japan

Detalii produs

Hubner+Suhner Adaptors for QMA interfaces

Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.

HUBER+SUHNER QMA

The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.

Informatii indisponibile despre stoc

Incercati din nou mai tarziu

Informatii indisponibile despre stoc

P.O.A.

SMC Cylinder Repair Kit CS1N200A-PS, For Use With 200 mm Bore Size Air Cylinder

1

Disponibil in multiplu de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

SMC Cylinder Repair Kit CS1N200A-PS, For Use With 200 mm Bore Size Air Cylinder
Informatii indisponibile despre stoc

1

Disponibil in multiplu de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Documente tehnice

Specificatii

Utilizare cu

200 mm Bore Size Air Cylinder

Producator

CS1N

Marca

SMC

Tara de origine

Japan

Detalii produs

Hubner+Suhner Adaptors for QMA interfaces

Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.

HUBER+SUHNER QMA

The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.