RS PRO Non Contact Voltage Indicator, 230V ac to 1000V ac
Documente tehnice
Specificatii
Marca
RS ProIndicator Type
Voltage
Battery Type
AAA
ATEX Approval
Yes
Power Source
Battery
Safety Category
CAT III 1000 V ac
Greutate
50g
Diametru
18mm
Lungime
151mm
Maximum Detection Voltage
1000V ac
Temperatura maxima de lucru
+40°C
Minimum Detection Voltage
230V ac
Safety Category Voltage
1000V ac
Safety Category Level
CAT III
Frecventa minima de auto-rezonanta
-20°C
Tara de origine
Denmark
Detalii produs
RS Pro Volt Stick Non-Contact Voltage Detector
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 68,02
Buc. (fara TVA)
€ 80,94
Buc. (cu TVA)
Tip calibrare
Fara calibrare
1
€ 68,02
Buc. (fara TVA)
€ 80,94
Buc. (cu TVA)
Tip calibrare
Fara calibrare
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 68,02 |
| 5+ | € 61,57 |
Documente tehnice
Specificatii
Marca
RS ProIndicator Type
Voltage
Battery Type
AAA
ATEX Approval
Yes
Power Source
Battery
Safety Category
CAT III 1000 V ac
Greutate
50g
Diametru
18mm
Lungime
151mm
Maximum Detection Voltage
1000V ac
Temperatura maxima de lucru
+40°C
Minimum Detection Voltage
230V ac
Safety Category Voltage
1000V ac
Safety Category Level
CAT III
Frecventa minima de auto-rezonanta
-20°C
Tara de origine
Denmark
Detalii produs
RS Pro Volt Stick Non-Contact Voltage Detector
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.