RS PRO Hybrid Stepper Motor, 0.88Nm Torque, 5.4 V, 1.8°, 56.4 x 56.4mm Frame, 6.35mm Shaft
Documente tehnice
Specificatii
Marca
RS ProStepper Motor Type
Hybrid
Step Angle
1.8°
Holding Torque
0.88Nm
Number Of Wires
8
Tensiunea de alimentare
5.4 V
Frame Size
56.4 x 56.4mm
Diametru ax
6.35mm
Curent nominal
1.4 A
Lungime ax
116.6mm
Adancime
76mm
Rezistenta
3.6Ω
Standarde
RoHS Compliant
Tara de origine
Taiwan, Province Of China
Detalii produs
Stepper Motors With/Without Rear Shaft Extensions
RS Pro stepper motors with 6 or 8 lead configuration.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
P.O.A.
1
P.O.A.
1
Documente tehnice
Specificatii
Marca
RS ProStepper Motor Type
Hybrid
Step Angle
1.8°
Holding Torque
0.88Nm
Number Of Wires
8
Tensiunea de alimentare
5.4 V
Frame Size
56.4 x 56.4mm
Diametru ax
6.35mm
Curent nominal
1.4 A
Lungime ax
116.6mm
Adancime
76mm
Rezistenta
3.6Ω
Standarde
RoHS Compliant
Tara de origine
Taiwan, Province Of China
Detalii produs
Stepper Motors With/Without Rear Shaft Extensions
RS Pro stepper motors with 6 or 8 lead configuration.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: