Documente tehnice
Specificatii
Numar nivele
Single
Culoare
Grey
Lungime totala
19,7 palců
Terminal
Screw
Curent nominal
30A
Tensiune nominala
500 V
Dimensiuni
8 (Dia) x 10.5mm
Marca
Phoenix ContactDimensiune celula
UT 2.5-QUATTRO
Tara de origine
Germany
Detalii produs
RN-131 802.11b/g Wi-Fi Evaluation Kit
The RN-131-EK is a Wi-Fi evaluation kit for the RN131 module that can be used to quickly add Wi-Fi connectivity to embedded applications. It has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL/UART interface. The board also includes two convenient push buttons for controlling both SoftAP and WPS (Wi-Fi Protected Setup) mode without software configuration. The status LEDs and jumpers enable rapid prototyping and integration into existing systems. The RN131 module is programmed and controlled from a console with a simple ASCII command language. Once the configuration is set up, the module can automatically scan to find an access point, associate, authenticate, and connect over any Wi-Fi network. Additionally, the module can automatically wake up, send data to a remote host and then go back to a low-power sleep state.
Supplied with
USB cable
WLAN (Wireless Local Area Network) - Microchip Technology
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 2,20
Buc. (Intr-un pachet de 5) (fara TVA)
€ 2,618
Buc. (Intr-un pachet de 5) (cu TVA)
5
€ 2,20
Buc. (Intr-un pachet de 5) (fara TVA)
€ 2,618
Buc. (Intr-un pachet de 5) (cu TVA)
5
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
5 - 25 | € 2,20 | € 11,00 |
30 - 55 | € 2,01 | € 10,05 |
60+ | € 1,90 | € 9,50 |
Documente tehnice
Specificatii
Numar nivele
Single
Culoare
Grey
Lungime totala
19,7 palců
Terminal
Screw
Curent nominal
30A
Tensiune nominala
500 V
Dimensiuni
8 (Dia) x 10.5mm
Marca
Phoenix ContactDimensiune celula
UT 2.5-QUATTRO
Tara de origine
Germany
Detalii produs
RN-131 802.11b/g Wi-Fi Evaluation Kit
The RN-131-EK is a Wi-Fi evaluation kit for the RN131 module that can be used to quickly add Wi-Fi connectivity to embedded applications. It has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL/UART interface. The board also includes two convenient push buttons for controlling both SoftAP and WPS (Wi-Fi Protected Setup) mode without software configuration. The status LEDs and jumpers enable rapid prototyping and integration into existing systems. The RN131 module is programmed and controlled from a console with a simple ASCII command language. Once the configuration is set up, the module can automatically scan to find an access point, associate, authenticate, and connect over any Wi-Fi network. Additionally, the module can automatically wake up, send data to a remote host and then go back to a low-power sleep state.
Supplied with
USB cable