Phoenix Contact MINI MCR Series Signal Conditioner, Resistance Input, Current, Voltage Output, 24V dc Supply, ATEX
Documente tehnice
Specificatii
Marca
Phoenix ContactTip modul
Resistance/Potiposition Transducer
Input Signal Type
Resistance
Output Signal Type
Current, Voltage
Input Range
100 → 100000 Ω
Output Range
0 → 10 V, 0 → 20mA
Tensiunea de alimentare
24V dc
Hazardous Area Certification
ATEX
Timp montare
DIN Rail Mount
Temperatura de lucru
-20 → +65°C
Serie
MINI MCR
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
+65°C
Distrelec Product Id
17689719
Tara de origine
Germany
Detalii produs
Resistance to Current/Voltage Converter
From Phoneix Contact, the DIN-Rail mounted slim MINI MCR-SL-R-UI resistance transducer converts potentiometer positions as a percentage to an analogue standard signal. If the potentiometer range cannot be utilized to the full, an externally accessible slide switch is used to set the upper and lower potiposition end values. The output signal between 0 and 100% is based on this fixed end value.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 298,55
€ 298,55 Buc. (fara TVA)
€ 355,27
€ 355,27 Buc. (cu TVA)
1
€ 298,55
€ 298,55 Buc. (fara TVA)
€ 355,27
€ 355,27 Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
Phoenix ContactTip modul
Resistance/Potiposition Transducer
Input Signal Type
Resistance
Output Signal Type
Current, Voltage
Input Range
100 → 100000 Ω
Output Range
0 → 10 V, 0 → 20mA
Tensiunea de alimentare
24V dc
Hazardous Area Certification
ATEX
Timp montare
DIN Rail Mount
Temperatura de lucru
-20 → +65°C
Serie
MINI MCR
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
+65°C
Distrelec Product Id
17689719
Tara de origine
Germany
Detalii produs
Resistance to Current/Voltage Converter
From Phoneix Contact, the DIN-Rail mounted slim MINI MCR-SL-R-UI resistance transducer converts potentiometer positions as a percentage to an analogue standard signal. If the potentiometer range cannot be utilized to the full, an externally accessible slide switch is used to set the upper and lower potiposition end values. The output signal between 0 and 100% is based on this fixed end value.