Parker PRT series 0.1s to 30s Pneumatic Timer, 8 bar max
Documente tehnice
Specificatii
Marca
ParkerMaximum Time
30s
Minimum Time
0.1s
Temperatura maxima de lucru
+60°C
Producator
PRT
Presiune minima de operare
3bar
Presiune maxima de operare
8 bar
Temperatura minima de lucru
-15°C
Detalii produs
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 281,79
Buc. (fara TVA)
€ 335,33
Buc. (cu TVA)
1
€ 281,79
Buc. (fara TVA)
€ 335,33
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 281,79 |
| 5+ | € 261,41 |
Documente tehnice
Specificatii
Marca
ParkerMaximum Time
30s
Minimum Time
0.1s
Temperatura maxima de lucru
+60°C
Producator
PRT
Presiune minima de operare
3bar
Presiune maxima de operare
8 bar
Temperatura minima de lucru
-15°C
Detalii produs
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.