Nuvotem Talema 230V ac, 2 x 15V ac Toroidal Transformer, 15VA 2 Output
Documente tehnice
Specificatii
Marca
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 15V ac
Putere
15VA
Numar iesiri
2
Secondary Current
500mA
Inaltime
31mm
Greutate
300g
Diametru
60mm
Dimensiuni
60 (Dia.) x 31mm
Maximum Operating Frequency
450Hz
Terminal
Copper Conductor Termination Wire
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Temperatura minima
0°C
Detalii produs
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 33,10
Buc. (fara TVA)
€ 39,39
Buc. (cu TVA)
1
€ 33,10
Buc. (fara TVA)
€ 39,39
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 9 | € 33,10 |
| 10 - 24 | € 30,25 |
| 25 - 49 | € 26,91 |
| 50 - 74 | € 23,70 |
| 75+ | € 20,52 |
Documente tehnice
Specificatii
Marca
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 15V ac
Putere
15VA
Numar iesiri
2
Secondary Current
500mA
Inaltime
31mm
Greutate
300g
Diametru
60mm
Dimensiuni
60 (Dia.) x 31mm
Maximum Operating Frequency
450Hz
Terminal
Copper Conductor Termination Wire
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Temperatura minima
0°C
Detalii produs
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558