Molex Premise Networks SLT3S Cable Tester STP, UTP
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Equipment Type
Cable Tester
Tip conector
STP, UTP
Model
SLT3S
Power Source
Battery
Battery Type
9V
Dimensiuni
146 x 58 x 38mm
Greutate
284g
Tip afisare
LED
Inaltime
144mm
Latime
60mm
Tara de origine
United States
Detalii produs
Molex UTP and STP Cable Tester
From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox
€ 126,59
€ 126,59 Buc. (fara TVA)
€ 153,17
€ 153,17 Buc. (cu TVA)
1
€ 126,59
€ 126,59 Buc. (fara TVA)
€ 153,17
€ 153,17 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Equipment Type
Cable Tester
Tip conector
STP, UTP
Model
SLT3S
Power Source
Battery
Battery Type
9V
Dimensiuni
146 x 58 x 38mm
Greutate
284g
Tip afisare
LED
Inaltime
144mm
Latime
60mm
Tara de origine
United States
Detalii produs
Molex UTP and STP Cable Tester
From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox