Documente tehnice
Specificatii
Actuator Type
Button
Actuator Length
0.5mm
Temperatura minima de lucru
-40°C
Tensiune
12V dc
Temperatura maxima de lucru
+85°C
Lungime
6.2mm
Functionare comutator
Momentary
Timp montare
Surface Mount
Culoare actuator
Red
Temperatura de lucru
-40 → +85°C
Latime
6.3mm
Configurare contact
SPST
Marca
Alps AlpineOperating Force
2.55 N
Dimensiuni
6.2 x 6.3mm
Contact Current Rating
50 mA
Detalii produs
Screw Cap, Screw In
From RS PRO, a selection of durable fully enclosed fuse holders designed for panel mounting. The 5x20 mm fuse holders are supplied in two parts, the fuse holder and the fuse carrier. Mounting is simple, once the desired panel cut out is made the fuse holder is pushed into the hole and securely retained with the locking washer. An appropriately sized fuse (10 Amp max) is inserted into the carrier and screwed together.
Replacing the fuse
Replacing a fuse is easy, simply insert a screwdriver tip into the slot in the cap and turn anti-clockwise
to loosen. The carrier is then removed from the holder and the fuse can be safely removed.
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
P.O.A.
10
P.O.A.
10
Documente tehnice
Specificatii
Actuator Type
Button
Actuator Length
0.5mm
Temperatura minima de lucru
-40°C
Tensiune
12V dc
Temperatura maxima de lucru
+85°C
Lungime
6.2mm
Functionare comutator
Momentary
Timp montare
Surface Mount
Culoare actuator
Red
Temperatura de lucru
-40 → +85°C
Latime
6.3mm
Configurare contact
SPST
Marca
Alps AlpineOperating Force
2.55 N
Dimensiuni
6.2 x 6.3mm
Contact Current Rating
50 mA
Detalii produs
Screw Cap, Screw In
From RS PRO, a selection of durable fully enclosed fuse holders designed for panel mounting. The 5x20 mm fuse holders are supplied in two parts, the fuse holder and the fuse carrier. Mounting is simple, once the desired panel cut out is made the fuse holder is pushed into the hole and securely retained with the locking washer. An appropriately sized fuse (10 Amp max) is inserted into the carrier and screwed together.
Replacing the fuse
Replacing a fuse is easy, simply insert a screwdriver tip into the slot in the cap and turn anti-clockwise
to loosen. The carrier is then removed from the holder and the fuse can be safely removed.
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.