Ultimaker Nozzle for use with Olsson Block, Ultimaker 2+ 0.5mm

Nr. stoc RS: 110-1986Producator: UltimakerCod de producator: OBS001
brand-logo

Documente tehnice

Specificatii

Product Type

Nozzle

Utilizare cu

Olsson Block, Ultimaker 2+

Nozzle Material

Stainless Steel

Nozzle Size

0.5mm

Tara de origine

Netherlands

Detalii produs

Ultimaker 2 Jet Nozzle - Stainless Steel

The Olsson block Stainless Steel Jet nozzle has a special tip angle and shoulder width, it also has a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more. You can print 3°C to 5°C lower because of this treatment, and is also useful for oozing and drips.

With this special stainless steel nozzle, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean it efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer

Ultimaker Accessories

Informatii despre stoc temporar indisponibile.

Incercati din nou mai tarziu

Informatii despre stoc temporar indisponibile.

€ 49,39

Buc. (fara TVA)

€ 58,77

Buc. (cu TVA)

Ultimaker Nozzle for use with Olsson Block, Ultimaker 2+ 0.5mm

€ 49,39

Buc. (fara TVA)

€ 58,77

Buc. (cu TVA)

Ultimaker Nozzle for use with Olsson Block, Ultimaker 2+ 0.5mm
Informatii despre stoc temporar indisponibile.

Documente tehnice

Specificatii

Product Type

Nozzle

Utilizare cu

Olsson Block, Ultimaker 2+

Nozzle Material

Stainless Steel

Nozzle Size

0.5mm

Tara de origine

Netherlands

Detalii produs

Ultimaker 2 Jet Nozzle - Stainless Steel

The Olsson block Stainless Steel Jet nozzle has a special tip angle and shoulder width, it also has a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more. You can print 3°C to 5°C lower because of this treatment, and is also useful for oozing and drips.

With this special stainless steel nozzle, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean it efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer

Ultimaker Accessories