Documente tehnice
Specificatii
Marca
Sensata / CrydomNormal State Configuration
2NO
Terminal Type
Screw
Length
45.31mm
Width
86.71mm
Depth
96.02mm
Load Voltage
48 V ac → 510V ac
Minimum Operating Temperature
-30°C
Input Current
7.5 mA → 13mA
Load Current
7.6A
Pole and Throw Configuration
3P
Mounting Style
DIN Rail Mount
Control Voltage
90 V ac → 140 V ac
Maximum Operating Temperature
+80°C
Tara de origine
Mexico
Detalii produs
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Informatii despre stoc temporar indisponibile.
Incercati din nou mai tarziu
€ 256,29
Buc. (fara TVA)
€ 304,99
Buc. (cu TVA)
1
€ 256,29
Buc. (fara TVA)
€ 304,99
Buc. (cu TVA)
1
Cumpara in pachete mari
Cantitate | Pret unitar |
---|---|
1 - 4 | € 256,29 |
5+ | € 234,22 |
Documente tehnice
Specificatii
Marca
Sensata / CrydomNormal State Configuration
2NO
Terminal Type
Screw
Length
45.31mm
Width
86.71mm
Depth
96.02mm
Load Voltage
48 V ac → 510V ac
Minimum Operating Temperature
-30°C
Input Current
7.5 mA → 13mA
Load Current
7.6A
Pole and Throw Configuration
3P
Mounting Style
DIN Rail Mount
Control Voltage
90 V ac → 140 V ac
Maximum Operating Temperature
+80°C
Tara de origine
Mexico
Detalii produs
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.