Adafruit Controller Board for DRV2605L for Haptic Motor
Documente tehnice
Specificatii
Marca
ADAFRUIT INDUSTRIESUtilizare cu
Haptic Motor
Clasificare
Development Board
Featured Device
DRV2605L
Kit Name
Controller Board
Detalii produs
Adafruit DRV2605L Haptic Motor Controller Board
This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.
Motor Controllers & Drivers
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 10,75
Buc. (fara TVA)
€ 12,79
Buc. (cu TVA)
1
€ 10,75
Buc. (fara TVA)
€ 12,79
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 10,75 |
| 5 - 9 | € 9,30 |
| 10+ | € 8,30 |
Documente tehnice
Specificatii
Marca
ADAFRUIT INDUSTRIESUtilizare cu
Haptic Motor
Clasificare
Development Board
Featured Device
DRV2605L
Kit Name
Controller Board
Detalii produs
Adafruit DRV2605L Haptic Motor Controller Board
This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.