Adafruit 1770, TFT LCD Display 2.8in Resistive Touch Screen Display Module With MicroSD Socket - ILI9341
Documente tehnice
Specificatii
Marca
ADAFRUIT INDUSTRIESDiagonala display
2.8in
Tehnologie display
Resistive Touch Screen
Clasificare
Display Module
Featured Device
MicroSD Socket - ILI9341
Kit Name
TFT LCD Display
Tara de origine
United States
Detalii produs
Adafruit 2.8 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.8” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
It is 3 V to 5 V compliant with high-speed level shifters so you can use with any microcontroller. If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.
Adafruit LCD Touchscreens
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 40,47
Buc. (fara TVA)
€ 48,16
Buc. (cu TVA)
1
€ 40,47
Buc. (fara TVA)
€ 48,16
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 40,47 |
| 5 - 9 | € 35,05 |
| 10+ | € 31,25 |
Documente tehnice
Specificatii
Marca
ADAFRUIT INDUSTRIESDiagonala display
2.8in
Tehnologie display
Resistive Touch Screen
Clasificare
Display Module
Featured Device
MicroSD Socket - ILI9341
Kit Name
TFT LCD Display
Tara de origine
United States
Detalii produs
Adafruit 2.8 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.8” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
It is 3 V to 5 V compliant with high-speed level shifters so you can use with any microcontroller. If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.